What is the meaning of side cutting pliers

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).

What is a side cutters used for?

A range of side cutters, also known as diagonal cutters availble for cutting wire. The cutting edges of the jaws intersects the joint rivet on an angle or diagonal, hence the name. They cut the wire by creating an indentation and then the tool wedges the wire apart, they should not be used in a shearing action.

What is the classification of side cutting pliers?

Lineman’s: (also known as side cutting pliers) are general use pliers used for cutting, gripping, twisting and crimping. Combination: perform the same functions as lineman’s pliers but are thinner and have two different types of gripping jaws in the head. Slip Joint: re used for grasping and turning.

What is another name for side cutting pliers?

They cut wire by indenting and wedging a cable apart (as opposed to shearing like scissors). The name comes from how the cutting edges of the jaws are set at an angle (hence the name “diagonal”). They are also known as side cutters, flush cut pliers, side cutting pliers, wire cutters, diagonal cutting nippers.

What is the difference between side cutters and flush cutters?

Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters or angle cutters, cut on an angle, meaning the wire edge will be cut to one side.

How many different pliers are there?

Pliers are used to grip, position, tighten, loosen, and cut certain metal elements. Learn about five types of pliers: slip-joint, water-pump, linesman, locking and needle-nose.

Are cutting pliers the same as wire cutters?

Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.

Can side cutters cut wire?

Side cutters are used to cut wire and the leads (or legs) of components in electronics. They can also be used to strip the insulation from wire.

How many types of wire cutters are there?

Locking wire cutters are generally available in 2 kinds: Needle Nose Wire cutter and Linemen’s wire cutter .

What is the meaning of combination pliers?

Definition of combination pliers : slip-joint pliers with a notched inner grip for holding and grasping round objects and cutting and bending wire.

Article first time published on

What is the use of pincer answer?

Pincers are primarily used for removing objects (typically nails) out of a material that they have been previously applied to. Carpenter’s pincers are particularly suited to these tasks. If the pincers have perpendicular cutting edges, the pincers are often called end-nippers or end-cutters.

What is another name for side cutters?

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).

What is a flat side cutter?

Flat side cutters provide you with a flush cut every time, while the PVC rubberized handles ensure comfortable use.

Are side cutters the same as diagonal cutters?

These tools tend to be durable and hard-wearing, designed for tough professional applications. One of the key differences is that diagonal cutters are often better suited to smaller, more delicate cutting tasks, whereas side cutters are ideally suited to larger-scale applications.

What are side cutters used for in Jewellery making?

Side cutters have sharp jaws that can come in a variety of shapes; these are used for cutting soft wires, threads or metal sheets. The shape of the cutters affect how the cut face will appear; general side cutters will leave the cut edge smooth and even.

What are the different types of cutting tools?

• Single Point Turning Tool. This cutting tool is for performing the turning operation in the lathe machine.
• Drill. …
• Mill (or Milling cutter). …
• Reamer. …
• Broach. …
• Fly cutter. …
• Shaper. …
• Planer.

Can wire cutters cut through metal?

For the most basic application of cutting cables, you can use the wire cutters to cut copper, brass, aluminium, iron and steel wire. To protect you from being shocked by the electric cables you are working with; some wire cutters have insulated handles.

How did pliers get their name?

Lineman pliers are named for the occupation of electrical linesmen. The job of being an electrical linesman was born in the 1840s, with the invention of the telegraph. … Linemen were those laborers who set the poles in place and strung the telegraph wires or lines between them.

Which plier is used mostly?

Locking pliers are one of the best working pliers used for clamping down things, mostly during times when having both hands free is helpful. These pliers are found having a double-lever action which allows them to act as a hand-held vise and therefore is also named as Vise-Grips that most of the people use for them.

What are gas pliers?

Definition of gas pliers : stout pliers designed for gripping small pipe, rods, or other round objects.

Which are the best wire cutters?

• Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. …
• Budget pick. Irwin Vise-Grip 2078306 6-Inch Diagonal Cutting Pliers. Quality at a bargain. …
• Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong. …
• Also great. Klein 11054 Wire Stripper-Cutter.

What are wire cutters look like?

Flush cut wire cutters (also called “combination” or “lineman’s pliers”) look like an ordinary pair of pliers but feature a pair of cutting blades flush to the outside edge and directly behind one of the plier’s gripping jaws. … However, they may require more manual force to cut the wire than diagonal cutters.

What wire cutters do electricians use?

7. Needle-Nose Wire Cutters. Needle-nose wire cutters are often used by electricians because the sharply tapered jaws make it easy to bend and insert wire into a switch-gear in electrical panels, where there is often not enough space to use any other type of pliers or cutters.

Which is used to cut tie wires?

Strong scissors, a knife (cut away from yourself), diagonal cutters, or any other durable cutters will work. The thicker the cable tie, the tougher the tool needed to cut through it.

What is the use of combination plier in wiring?

Combination pliers are multi-purpose pliers, combining gripping jaws with wire cutters. They can be used for gripping, compressing, bending, twisting, extracting and cutting various materials.

What are crab pincers?

Pincers. Crabs have claws at the end of their front two legs. These are like pincers, a tool with two parts used to grip things. Crabs use their pincers for fighting and for catching prey and tearing it apart to eat.

What does a pincer look like?

In appearance, the pincer looks somewhat like a pair of scissors. There are handles that make it easy to grasp the tool with both hands. Rather than the tapered blades that are common with most pairs of scissors, pincers will feature a set of jaws that are usually blunt at the ends.

What is tower pincer?

Tower Pincers. These pliers are used for extracting deep embedded nails from timber or removing objects out of a material that they have been previously applied to. Also suitable for extracting nails from concrete. Ideal for the builder, DIY, construction and handyman use.

Who invented wire cutters?

The compound automatic wire stripper was first patented in 1915 by Stuart G. Wood of Brooklyn, NY.

What is an end cutter?

End cutting pliers, sometimes referred to as end cutters or nippers, are useful for cutting through materials in order to remove excess material with ease. The shape of the blade allows them to cut close to a flush surface.